5L Double-Wall Glass Reactor
It can be used in the experiment, middle-scale test, and production of chemistry, fine chemical engineering, biological pharmacy and synthesis of new materials.
The Introduction:
Reagents are set in the inner layer of double-layer glass reactionkettle, at the same time, vacuum can be taken out and mixing speedbe adjusted. Interlayer can lead in refrigerating fluid, water and high temperature liquid to heat and cool the materials. It can be used in the experiment, middle-scale test, and production of chemistry, fine chemical engineering, biological pharmacy and synthesis of new materials. The products can be made into system devices with multi-purpose circulating water vacuum pump, diaphragm vacuum pump, low temperature circulating pump(vacuum), circulating cooler, constant temperature circulator, low temperature cooling liquid circulating pump and closed cooling and heating circulating equipment.
The Characteristics:
●High borosilicate glass has good physical and chemical properties.
●Can be used in wide temperature range from high temperature (200℃)to low temperature(-80℃).
●Can work in constant pressure and vacuum, vacuum degree is below 0.095MPa in stationary.
● Digital display of mixing speed, frequency conversion, and constant speed mixing system, work steadily.
● The sealing method and materials between mixer shaft ,PTFE mixing propeller(paddle),and ketttle cover are Know how of our company.
● Corrosion resistant discharge valve is without dead space design.
●The cooling or heating solution in the interlayer can be completely removed after reaction.
● The whole structure is novelty, practical and beautiful.
Model | MGR-5 |
Electrical Requirements | 1~,220V/50Hz |
Glass Parts | Glass Vessel Capacity | 5L |
Cooling/Heating Jacket Capacity | 1.5L |
Jacket Cooling/Heating Surface | 0.13 m² |
Condenser Cooling Surface | 0.045 m² |
Glass Type | Food grade borosilicate 3.3 |
Temperature Range | -80~200℃ |
Working Pressure | -0.1 MPa~Ordinary pressure |
Vessel Cover | Domed with 5 openings |
5 Openings | Opening for Stirring Shaft | 50# Flanges |
Opening for Temperature Sensor | 24# standard Ground Mouth |
Opening to Connect Condenser | 35# standard Ball Mill Joint |
Opening to Feed Liquid Material | 24# standard Ground Mouth |
Opening for Constant Pressure Funnel | 29# standard Ground Joint |
Stirring Parts | Motor Power | 90 W |
Controller | Digital controller with variable frequency |
Rotation Speed | 0~500 rpm |
Stirring Shaft | PTFE covered stainless steel |
Agitator | 4-blade paddle |
Vacuum Sealing | Patented sealing kit |
Safety | Over-heat, Over-load protection |
Drain Valve | 1. Without dead volume 2. 360mm Above Floor (adjustable) |
Inlet/Outlet | DN 15 Flange Sealing |
Vacuum Sealing | PTFE |
Temperature Sensor | PTFE reinforced stainless steel, Chemical Resistant |
Supporting Frame | Stainless Steel 304 |
Dimensions(mm) | 553L×520W×1688H |
Net Weight | 50 KG |